Menu
Your Cart

EMFAD® - UG12 DS / WL

EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
Yeni
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
EMFAD® - UG12 DS / WL
  • Stok: Var
  • Model: EMFD12DS
181630 gösterim
20.000,00TL
Vergiler Hariç: 20.000,00TL

Kiralama Hizmeti : bir yer için kullanıcı ile

beraber aynı gün içerisinde götürüp

getirme ve tüm sorumluluklar kiralayan

firma yada şahsa aittir. 


EMFAD® - UG12 DS / WL
Horizontal measuring method:
The main application area for measurements is the horizontal method. With the comfortable attitude of the device can be easily measure large areas.
Both antennas can be individually controlled.
You can decide between automatic and manual measuring point recording .
In general, the automatic measuring point recording forSurvey measurements is chosen in good terrain. The once selected step speed and step distance must be maintained for the entire area.
Vertical measuring method:
This method is used for smaller areas and where high resolution is required for small target structures.

The measurement itself is done according to the requirements in a suitable grid on as straight as possible profiles. The profiles are either always unidirectional or meandering. With the meander-shaped measuring fixture, the running direction is changed by 180 degrees for every other profile.

If a detail measurement is made
or the terrain is difficult to walk,
should be a manual measuring point recording
be performed.
Single antenna for:
- Overview measurements
- to locate suspected areas
- Measurements in difficult terrain




Carrying case for TABLET-PC:
Equipped with a sunshade, the TABLET can be viewed in bright sunlight
Delivery:
The EMFAD®-UG12 DS/WL Measurement System Hardware consists of:
- EMFAD®-UG12 receiver
- Carrying racks for double and single antenna
- Carry bag
- 2 rod antennas
- Transmitter/generator EMFAD®-TRX2
- Antenna cable for the transmitter/generator
- Chargers for receiver and transmitter
- stable aluminum box with foam

The EMFAD®-UG12 DS / WL measuring system software
consists of
- EMFAD®-Tab (recording measurement software) and
- EMFAD®-Scan (evaluation software)

EMFAD®- Tab:
Spectrum (frequency analysis):
In the subprogram "spec" All receivable locally Frequencies are shown in a dynamic display in percent as well as in a waterfall display as a different bright bar.
The tool can be used locally to determine the frequencies that can be received there and to overwrite up to seven previously stored frequencies with "change and save frequency",